Digital timer

.

Smart WiFi timer

.

Digital timer user manual

Note:This timer has an internal rechargeable battery to keep your settings in the event of a power failure. When new, or not used for some time, the battery may need to be recharged before setup. Plug in the timer for a few hours in order for the battery to be recharged. If the numbers do not appear on the screen, press the R (reset) button with a pencil.

.

Main steps of the set up:
1. Setting the clock
2. Setting  the timer program
3. Plugging the device and selecting AUTO mode with the red light off.

.

1. Setting the clock
The first step is to set the current time:

1.1  Press “clock” button
1.2  Press “+” or “-” to set the day of the week, press “Enter” to confirm - the hour display will flash.
1.3  Press “+” or “-” to set the current hour, press “Enter” to confirm - the minute display will flash.
1.4  Press “+” or “-” to set the minutes, press “Enter” to confirm - the seconds display will flash. Press “Enter” to confirm and save.

.

2. Setting the timer
You can program up to 16 events. Every event has a turning on time (ON) and a turning off time (OFF).

2.1  Press “Clock” and “Enter” buttons at the same time to enter timer setting options.
2.2  When you see “1ON” flashing on the display, press “Enter”.
2.3  Repeat 1.2 to 1.4 steps to set the turning on time.
2.4  When you see “1OFF” flashing on the display, press “Enter”.
2.5  Repeat 1.2 to 1.4 steps to set the turning off time.
2.6  You can program up to 16 events
2.7 Press “Clock” to confirm and save. 

.

3. Timer auto/on/off mode setting
For the timer to automatically operate any device, the word AUTO must be displayed.

3.1  Plug in the timer and press the “Mode” button to select between AUTO / ON / OFF options.
3.2  With the "ON" function the red light is on: it means that the timer supplies electrical current all the time.
3.3  With the "OFF" function the red light is off: it means that the timer will never let electric current flow through.
3.4  The "AUTO" function means that the timer will follow the timing setup you have programmed. For the timer to perform the event you have programmed, select the "AUTO" function with the red light off. The red light will turn on each time the let electric current pass through.

.

4. Special function
4.1 Summer time setting:
4.1.1 Press the “Enter” button and “+” button at same time, “S” will show on the display for summer time.
4.1.2 Press the “Enter” button and “+” button at same time again, “S” will disappear from the display for winter time.
4.2 Press “Mode” and “Clock” button at same time, to select 12h or 24h time display.
4.3 Press “Reset” button for 2 seconds to reset the timer.

.

5. Notes
5.1 Use the timer with a voltage of 220V ± 10% and a maximum power of 3600W.
5.2 Timer is ONLY suitable for indoor use.
5.3 The clock error range is 2 minutes per month.

.

Smart timer tips

Program the smart timer next to the rooter, it's easier for the device to connect to the smartphone. Once linked, you can unplug the device and plug it again in the final spot. The smart device has an internal memory that keeps the basic data, so it doesn't need the WiFi to turn on irrigation.